Injector-NF

DC Input PoE Injector

1. Input :

   
   1.1. Input Voltage : 9Vdc to 36Vdc
   1.2. Input Current : 1.85A at 12Vdc；0.90A at 24Vdc

2. Output：

   Output Voltage & Current

   OUTPUT	+48V
   Max.load	0.35A
   Power	17W
   Min. Load	0.01A
   Load reg.	5%
   Line reg. %	1%
   Ripple %	1%
   Noise %	1%

   Note：Noise bandwidth is from DC to 20Mhz. Ripple & Noise is measured by Paralleling a 0.1uF metalize capacitor on the test point.

3. Efficiency：

   min at Full Load, 12Vdc & 24Vdc Input Voltage.

4. Protection :

   4.1. Short Circuit Protection
   Output short ground (GND). The terminal will not damage the power supply and will Auto-Reset.
   4.2. Over Current Limits
   4.2.1. 120% to 160% @ 12Vdc input full load.

5. RJ-45 Connector & Pinout

   	RJ-45 Output (Data & Power)		RJ-45 Input (Data Only)
   Pin	Symbol	Description	Symbol	Description
   1	Rx+	Data Receive	Rx+	Data Receive
   2	Rx-	Data Receive	Rx-	Data Receive
   3	Tx+	Data Transmit	Tx+	Data Transmit
   4	-Vdc	Feeding Power(+)	NC	No Connection
   5	-Vdc	Feeding Power(+)	NC	No Connection
   6	Tx-	Data Transmit	Tx-	Data Transmit
   7	(-Vdc)_return+	Feeding Power(-)	NC	No Connection
   8	(-Vdc)_return+	Feeding Power(-)	NC	No Connection