Injector‐GRT
Additional files
Injector-GRT_v1_Spec_FWS_20150622.pdfProduct Introduction
Gigabit PoE/PoE+ Repeater
Injector-GRT 10/100/1000Mbps, Extend 100m Distance
KPE-5024GT3 is 24-port 10/100/1000Mbps Power over Ethernet which consists of 24 PSE/PoE ports and support 2 Gigabit SFP uplink slots. The models compliant to POE IEEE 802.3af, it defines new green power saving idea on PSE Port. That can solve the limitation of the power outlet location and offer the system relocation easily.
Key Features
- Complies with IEEE802.3 10Base-T; IEEE802.3u 100Base-TX and IEEE802.3ab 1000Base-T
- Complies with IEEE 802.3 at PoE+ ; IEEE802.3af PoE Standards, Mid-Span PSE
- Supports two 10M/100M auto-detect Half/Full duplex switch ports with TX interfaces.
- Built-in 96K Byte SRAM buffer memory.
- Supports 2K MAC addresses entry tables with4-ways associative hash algorithm
- Support IGMP V1, V2, and IGMP snooping
- Supports Store & Forward architecture and performs forwarding and filtering at non-blocking full wire speed.
- Supports 802.3x Flow Control pause packet for Full Duplex in case buffer is full.
- Supports Back Pressure function for Half Duplex operation in case buffer is full.
- Supports packet length up to 1522 (Default) / Maximum 1536 bytes .
- Broadcast/ Multicast Storm suppression.
- Supports buffer allocation with 512 bytes per block
- Supports per port Single/Dual color mode with Power On auto diagnostic.
- Two RJ-45 interfaces, One Data+Power input and One Data+Power output
- Auto-detect PoE equipment, IEEE802.3at or IEEE802.3af, protecting the device from being damaged by incorrect link
- Remote support port up to 100M from PSE port, maintain power zero loss to PD device
- Support multiple repeaters to multiple 100M Ethernet distance and supply PoE+ power into the PD device.
- Power saving design, keep less power over RJ45 cable until PD device request LED indicators for Power LED and PoE function enable
Technical Specifications
Standards | IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE802.3ab 1000Base-T IEEE802.3X IEEE802.3at Power Over Ethernet ( PoE +) IEEE802.3af Power Over Ethernet ( PoE ) |
---|---|
Features | Number of Ports: 1 *RJ-45 Connector : Data+ power input port 1 * RJ-45 Connector: Data+ power output port |
Data Transfer Rate | Ethernet: 10Mbps/Half-Duplex 20Mbps/Full-Duplex Fast Ethernet: 100Mbps/Half-Duplex 200Mbps/Full-Duplex Gigabit: 2000Mbps/Full-Duplex |
Transmission Media | 10BaseT Cat. 3, 4, 5 UTP/STP, up to 100 m 100BaseTX Cat. 5 UTP/STP, up to 100 m 1000BaseTX Cat. 5 UTP/STP, up to 100 m |
LED Indicators | Per Port: Input: PoE power in, Link/Act, Output: PoE power out, Link/Act |
Power Requirement | Input: 24 -57Vdc, Output: 48Vdc |
Power Consumption | 3Watts (Max) |
Dimensions | 94*70.5*26mm (L x W x H) metal |
Weight | 230g |
Operating Temperature | 0 to 45℃ |
Storage Temperature | -20 to 90℃ |
Humidity | 10 to 90% RH (non-condensing) |
Certifications | FCC Class A, CE |