Indoor access point - XN-2593H( 802.11b/g)
Additional files
XN-2593HP_Spec_FWS_20120802_v1.pdfProduct Introduction
XN-2593HP 802.11 b/g/n Access Point / Router
12V Passive PoE/ 1 WAN + 1 LAN
FEATURES
- Support advanced 1 x 1 MIMO Technology
- Up to 150Mbps downstream and upstream
- Complies with 2.4GHz IEEE 802.11b/g standards
- Low Noise Amplifier (LNA) support
- Support 20MHz and 40 MHz bandwidth
- RF output power adjustable
- Virtual DMZ, Port Forwarding
- TCP/UDP/ICMP/ARP protocol stack
- Firewall, URL/IP/Port/MAC filtering
- Wireless users access control
- Multiple SSID / NTP client
- Support 64/128bit WEP, WPA TKIP, WPA2 AES, 802.1x, WPS (Wi‐Fi Protected Setup) via PIN
- Support PPPoE, VPN pass‐through (PPTP and L2TP)
- QoSenhancement ‐WMM
- Easy quick setup wizard with web‐based utility
- Support 12V Passive PoE
WiVIEW2, Managed Tool
SPECIFICATION
Standard | IEEE 802.11b/g/n | Operation Mode |
Gateway Bridge Wireless ISP |
---|---|---|---|
Antenna | A detachable 5dBi antennas |
Frequency Band |
2.400GHz ~ 2.484GHz |
Security | 64/128bit WEP WPA (TKIP with IEEE 802.1x) WPA2 (AES with IEEE 802.1x) WPA Mixed |
Data Rate | 802.11b: 11, 5.5, 2 and 1 Mbps with auto‐rate fall back 802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps 802.11n (20MHz): up to 144Mbps 802.11n (40MHz): up to 150Mbps |
Sensitivity | ‐96dBm @ 802.11b ‐91dBm @ 802.11g ‐91dBm @ 802.11n |
Output Power | 802.11b: up to 30 ± 1 dBm 802.11g: up to 30 ± 1 dBm 802.11n: up to 30 ± 1 dBm |
Wireless Mode | AP Client WDS AP+WDS |
Power requirement |
DC Jack: 12V DC PoE: 12V Passive PoE |
Operation Temperature |
‐20°C ~ 60°C | Storage Humidity |
10% ~ 90% (Non condensing) |
Dimension (mm) |
Interface | RP‐SMA antenna connector x 1 RJ‐45 WAN port x 1 RJ‐45 LAN ports x 1 |