Share To Facebook

KWS-10E

KWS-10E
    Product Name : KWS-10E
    Product No : KWS-10ET
    Product Introduction

    Network Lightning / Surge Protector PoE Compatible

    P/N : KWS-­10E

    Features :

    • Shielded RJ45 jack and metal housing for EMC noise suppression.
    • CAT5 / CAT5e compatible.
    • Cast aluminum construction.
    • Integral mounting feet.
    • Bi-Directional Protection

    Specifications :

    Operating Voltage Data 5V PoE 48V
    Break Down Voltage Data 90V Power 90V
    Max. Surge Discharge Current Data 10KA Power 10KA (8/20uS)
    Peak Pulse Current 100A (10/1000uS)
    Pin Protected (1) All 8 pin protected
    Protection Mode Differential & Common mode
    Insulation Impedance > 1000Mohm
    Max. Shut Capacitance Power < 2.5pF Data < 2.5pF
    Data Rate 1000Mbps
    Impulse Protected Voltage < 500V
    Response Time < 5nS
    Operating Temperature -40℃ ~ +85℃
    Storage Temperature -40℃ ~ +125℃
    Operating Humidify 0 ~ 95% non condensing
    Ground Lug Wire 16AWG
    Dimensions 120 x 25.4 x 25.4 mm (include bracket)
    111 x 25.4 x 25.4 mm (main body)
    Weight 105g

    Note 1

    • Pin to Pin & Pin to Ground
    • 4/5 pin to 7/8 pin & 4/5 pin to ground & 7/8 pin to ground.
    • 1/2 pin to ground & 3/6 pin to ground.
    • 1 pin to 2 pin over current protection, 3 pin to 6 pin over current protection.
    • 4 pin to 5 pin over current protection, 7 pin to 8 pin over current protection.

    Over current protection turn-off point 180mA ~ 360mA.

    Mechanical Specifications

    Installation / Application :

    ** The Protector is Bi-Directional so it’s no issue in connection between Host and slave devices

    Back