KWA-O1850-I Outdoor Wireless Bridge
Product Introduction
5GHz FDD Radio System for E1/T1 Bridge
KW1850 Series P2P WiFD2® Wireless Backhaul Bridge
Ultra Low Latency KWA-O1850 Series
Formosa KW1850 series of all Wireless Backhaul Bridge are designed for point to point application. These bridges with functions of PoE(Power over Ethernet) power supply, waterproof, dustproof and coolant can build up a low packet latency and high bandwidth connection between two buildings. Such marvelous products are so suitable to be set up outdoors. Radio in the KW1850 series support capabilities ranging from 1.6 Mbps to an industry-leading 120 Mbps of aggregate user throughput, and 100BaseT interfaces. Featuring native FDD and native Ethernet transport and full software configurability and upgradeability, the KW1850 series was designed to meet demanding backhaul requirements of enterprise organizations and service providers seeking the performance benefits of an all-outdoor configuration.
Security, Management and Data Networking. The KW1850 series deliver the highest data and management security available with 256-bit AES encryption and secure SNMP v2 management, together with enhanced fault management and diagnostic features.
WiVIEW 2, Managed Tool
| KWA-O1850 Series | |||
|---|---|---|---|
| Tuning Resolution | 1 MHz | ||
| Output Power (full power) | +25 dBm BPSK1/2, +20dBm 64QAM3/4 | ||
| Power Control Step Size | 1 dB | ||
| Receiver Threshold (BER=10-6) | 20 MHz | 40 MHz | |
| 64QAM 3/4 | -70 | -68 | |
| 64QAM 1/2 | -75 | -73 | |
| 16QAM 3/4 | -78 | -76 | |
| 16QAM 1/2 | -82 | -80 | |
| QPSK 3/4 | -84 | -82 | |
| QPSK 1/2 | -86 | -84 | |
| BPSK 3/4 | -88 | -86 | |
| BPSK 1/2 | -90 | -88 | |
| Throughput (Mbps) | 70 | 125 | |
| Non-overlapping Channels | 2 | ||
| Configuration and Management | |
|---|---|
| WEB GUI | Navigating the GUI |
| SNMP | SNMP v1/v2 |
| QoS | 802.1P (Ethernet) |
| Diagnostic and Testing | |
| Ethernet Loopback | |
| No Loopback | Default |
| External Local Loopback | External loopback modes are used in conjunction with an externaltest source |
| External Remote Loopback | External loopback modes are used in conjunction with an externaltest source |
| Internal Loopback | Internal loopback uses an internal test source, and sends the test source signal across the link, looped at the remote radio's interface, returned to the local radio, and looped at the local radio's interface back to the source. The inputs at both ends are looped back at the line level. |
| PING Remote Birdge | |
| Protocol Stack | SNMP, HTTP, UDP, TCP, IP v4, DNS, |
| System (Continue) | |
|---|---|
| Maximum RSL | -15 dBm error free |
| 0 dBm no damage | |
| Maximum Packet Size | 1514 bytes |
| Data Security Packets Per Second | 256-bit AES encryption |
| 20,000+ packets/s | |
| End to End Packet Latency | <1ms |
| Physical | |
|---|---|
| Physical Configuration | Outdoor Unit (ODU) |
| Operation Temperature | -20 to +75 ℃; -4 to 167℉ |
| Full Specification Temperature | -20 to +75 ℃ |
| Environmental | NEMA 4/IP68 |
| Humidity | 100% condensing |
| Interface | |
| Ethernet | RJ-45(F) |
| Speed | 10/100BaseT (POE) |
| Duplex | Half, Full, Auto-MDIX |
| Compliance | 802.3 |
| DC Power | 48VDC, <20W |
| Model | Frequency MHz | Antenna dBi | Output Power dBm | Sensitivity dBm | Dimension mm | Weight Kg |
|---|---|---|---|---|---|---|
| KWA-O1850-I | 5,120-5,900 | 23 / N Jack | 23 (200mW) | -90 | 335x 335x 81 | 2.9 |
